285/50R20 vs 255/50R20
New overall diameter
30.04″
was 31.22″
True speed at an indicated 60
57.7 mph
your speedo reads high
Revolutions per mile
671
was 646, +25
| Measurement | 285/50R20 | 255/50R20 | Change |
|---|---|---|---|
| Overall diameter | 31.22″ | 30.04″ | −1.18″ (−3.8%) |
| Sidewall height | 5.61″ (142.5 mm) | 5.02″ (127.5 mm) | −15.0 mm |
| Tread width | 285 mm | 255 mm | −30 mm |
| Circumference | 98.08″ | 94.37″ | −3.71″ |
| Revs per mile | 646 | 671 | +25 |
| Speedometer error | baseline | −3.8% | reads high |
Diameter overlay
285/50R20 255/50R20
Speedometer check
With 255/50R20 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
24.1 mph actual
35 mph shown
33.7 mph actual
45 mph shown
43.3 mph actual
55 mph shown
52.9 mph actual
65 mph shown
62.5 mph actual
75 mph shown
72.2 mph actual
Common questions
- Will 255/50R20 fit instead of 285/50R20?
- At 3.8% this lands between the 3% and 5% marks. Plenty of people run swaps like this, but you will see real speedometer error, and you want to check the wheel well at full lock and full compression before you buy. Your speedometer will read high, so you are going slower than it says. Overall diameter goes from 31.22″ to 30.04″, a change of −3.8%. The rule of thumb most shops use: under 3% is fine, 3 to 5% needs a clearance check, over 5% needs recalibration.
- How far off will my speedometer read on 255/50R20?
- At an indicated 60 mph you are really doing about 57.7 mph, a −3.8% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 285/50R20 and 255/50R20?
- 285/50R20 turns about 646 times per mile and 255/50R20 turns about 671, a difference of +25. Your speedometer and odometer both count rotations, so this number is what throws them off.