285/65R20 vs 295/65R20
New overall diameter
35.10″
was 34.59″
True speed at an indicated 60
60.9 mph
your speedo reads low
Revolutions per mile
575
was 583, −9
| Measurement | 285/65R20 | 295/65R20 | Change |
|---|---|---|---|
| Overall diameter | 34.59″ | 35.10″ | +0.51″ (+1.5%) |
| Sidewall height | 7.29″ (185.3 mm) | 7.55″ (191.8 mm) | +6.5 mm |
| Tread width | 285 mm | 295 mm | +10 mm |
| Circumference | 108.66″ | 110.26″ | +1.61″ |
| Revs per mile | 583 | 575 | −9 |
| Speedometer error | baseline | +1.5% | reads low |
Diameter overlay
285/65R20 295/65R20
Speedometer check
With 295/65R20 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
25.4 mph actual
35 mph shown
35.5 mph actual
45 mph shown
45.7 mph actual
55 mph shown
55.8 mph actual
65 mph shown
66.0 mph actual
75 mph shown
76.1 mph actual
Common questions
- Will 295/65R20 fit instead of 285/65R20?
- Overall diameter changes 1.5%; section width changes 10 mm. Diameter comparison alone cannot confirm fitment. Verify the vehicle maker's approved rim width, tire load and speed ratings, and clearance at full steering lock and suspension compression. Confirm any possible ABS, traction-control, speedometer, and drivetrain effects with the vehicle maker or a qualified tire professional. Overall diameter goes from 34.59″ to 35.10″, a change of +1.5%. The rule of thumb most shops use: under 3% is fine, 3 to 5% needs a clearance check, over 5% needs recalibration.
- How far off will my speedometer read on 295/65R20?
- At an indicated 60 mph you are really doing about 60.9 mph, a +1.5% error. The speedometer reads low, so you are going faster than it shows.
- What is the difference in revolutions per mile between 285/65R20 and 295/65R20?
- 285/65R20 turns about 583 times per mile and 295/65R20 turns about 575, a difference of −9. Your speedometer and odometer both count rotations, so this number is what throws them off.