295/60R20 vs 285/55R20
New overall diameter
32.34″
was 33.94″
True speed at an indicated 60
57.2 mph
your speedo reads high
Revolutions per mile
624
was 594, +29
| Measurement | 295/60R20 | 285/55R20 | Change |
|---|---|---|---|
| Overall diameter | 33.94″ | 32.34″ | −1.59″ (−4.7%) |
| Sidewall height | 6.97″ (177.0 mm) | 6.17″ (156.8 mm) | −20.3 mm |
| Tread width | 295 mm | 285 mm | −10 mm |
| Circumference | 106.62″ | 101.61″ | −5.01″ |
| Revs per mile | 594 | 624 | +29 |
| Speedometer error | baseline | −4.7% | reads high |
Diameter overlay
295/60R20 285/55R20
Speedometer check
With 285/55R20 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
23.8 mph actual
35 mph shown
33.4 mph actual
45 mph shown
42.9 mph actual
55 mph shown
52.4 mph actual
65 mph shown
61.9 mph actual
75 mph shown
71.5 mph actual
Common questions
- Will 285/55R20 fit instead of 295/60R20?
- At 4.7% this lands between the 3% and 5% marks. Plenty of people run swaps like this, but you will see real speedometer error, and you want to check the wheel well at full lock and full compression before you buy. Your speedometer will read high, so you are going slower than it says. Overall diameter goes from 33.94″ to 32.34″, a change of −4.7%. The rule of thumb most shops use: under 3% is fine, 3 to 5% needs a clearance check, over 5% needs recalibration.
- How far off will my speedometer read on 285/55R20?
- At an indicated 60 mph you are really doing about 57.2 mph, a −4.7% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 295/60R20 and 285/55R20?
- 295/60R20 turns about 594 times per mile and 285/55R20 turns about 624, a difference of +29. Your speedometer and odometer both count rotations, so this number is what throws them off.